+39 0931 882299 Chiamaci
info@ditancolor.it Scrivici
C.da Pantano 96010 Palazzolo Acreide (SR)

Erice Special 1.0

Erice Special 1.0

Acrylic wall coating; fine size

ERICE SPECIAL 1.0 is an acrylic wall covering with a protective and decorative thickness, able to form a continuous opaque, porous, transpiring layer, with excellent adhesion to substrates, excellent resistance to atmospheric agents, washing, abrasion, low dirt retention, and a chromatic stability even in correspondence of surfaces exposed to bad weather and light radiations.

Description

■ TECHNICAL CHARACTERISTICS
ERICE SPECIAL 1.0 is a protective and decorative acrylic wall covering,. It forms a continuous porous and breathable opaque layer,
with excellent adhesion to supports, excellent resistance to weathering, washing, abrasion, low retention of dirt, and colour stability
even on surfaces exposed to weather and light radiation.

■ COMPOSITION AND USE
ERICE SPECIAL 1.0 is made up of acrylic resins in emulsion, siliceous inert particles, selected marble granules, inorganic pigments,
and specific additives. It is used to protect and decorate lime or cement-based plaster, plasterboards and concrete. Thanks to its wellbalanced
formulation, to its easiness of application and traditional aesthetic effect, it’s used to decorate and restore new and old
buildings.

■ PREPARING SURFACES AND APPLICATION
The walls must be seasoned and dry, free from dust and dirt, oil, vegetable colonies, evidence of salts, residual of working. Walls not
perfectly anchored must be brushed and cleaned. Very absorbent surfaces or with significant differences in absorption, or crumbly
plaster must be wetted with ACRIL PRIMER, insulator acrylic fixer, or with IDROFIX DM 50, consolidating fixative. In the event
of not crumbly or synthetic plaster is sufficient to isolate with a layer of MICRON PAINT or PITTURA AL QUARZO. This product
must be applied following the instructions carefully, first with a stainless steel trowel and then with a plastic trowel.