+39 0931 882299 Chiamaci
info@ditancolor.it Scrivici
C.da Pantano 96010 Palazzolo Acreide (SR)

Giada

Giada

Semi-breathable water-based paint with excellent coverage

Semi-breathable water-based paint with excellent coverage. Excellent brushability and yield.

Description

■ TECHNICAL CHARACTERISTICS
GIADA is a semi – washable, breathable water based paint with an excellent coating properties, yield and white base.

■ COMPOSITION AND USE
GIADA is made up of quality polymeric binders in watery emulsion, micronized charged particles, fungicide and specific additives.
It may be used on all surfaces like lime or cement based plaster, plasterboard and concrete. It is recommended for the painting of
facades of old and new buildings.

■ PREPARING SURFACES AND APPLICATION
New facades:
The walls will have to be seasoned and dry, free from powder and dirt. Any traces of oils, waxes, grease, etc must be opportunely
removed. Brush and remove any residual of working. Fix and isolate the imperfections of walls. Wait at least 28 days after applying
plaster. Very absorbent surfaces or with significant differences in absorption, crumbly plasters must be preventively treated with
ACRIL PRIMER, acrylic insulator, or with IDROFIX DM 50, consolidating fixative. Then apply two or more coats of GIADA by
roller, brush or spray. The first coat goes diluted with 40% of water, the second one with 30%.
Old weathered surfaces:
Walls just painted with paintings firmly attached to the substrates must be properly clean, removing residual of powder, dirt, oils,
waxes, fats, etc. Subsequently consolidate walls with ACRIL PRIMER or with IDROFIX DM 50. Apply paintings only after
complete drying of treated surfaces. If walls are painted with paintings not firmly attached to supports is necessary to brush, scrap or
strip of the parts to remove. Finish the job with consolidation and painting.