+39 0931 882299 Chiamaci
info@ditancolor.it Scrivici
C.da Pantano 96010 Palazzolo Acreide (SR)

Micron Paint

Sale!

Micron Paint

150.00 140.00

Colored paint based on acrylic resins.

MICRON PAINT is a colored paint based on acrylic resins in aqueous solution for interiors and exteriors indicated for the finishing of facades of new and antique buildings. MICRON PAINT is characterized by the remarkable ease of application, for high resistance to weathering, alkali, atmospheric agents, light and optimal adhesion to treated substrates.

Description

■ TECHNICAL CHARACTERISTICS
MICRON PAINT is a protective and decorative coloured acrylic paint. It is suitable for finishing the facades of new and old
buildings. MICRON PAINT is formulated in order to allow a remarkable easiness of use, in order to get weather resistance, alkali
resistance, light resistance and an optimal adhesion to the surfaces. It is suitable for indoor and outdoor uses.

■ COMPOSITION AND USE
MICRON PAINT is made up of acrylic resins in emulsion, siliceous inert particles, selected marble granules, inorganic photo
resistant pigments and specific additives. It can be used on any lime-based or cement-based surfaces, treated first if necessary.
Thanks to its well-balanced formulation, to its easiness of application and traditional aesthetic effect, it’s used to decorate and restore
new and old buildings. It’s also used as coloured acrylic undercoat before applying layered finishing materials from acrylic range. In
this way it evens the absorption of surfaces and promotes the adhesion of the topcoat.

■ PREPARING SURFACES AND APPLICATION
The walls must be seasoned and dry, free from dust and dirt, oil, vegetable colonies, evidence of salts, residual of working. Walls not
perfectly anchored must be brushed and cleaned. Very absorbent surfaces or with significant differences in absorption, or crumbly
plaster must be wetted with ACRIL PRIMER, insulator acrylic fixer, or with IDROFIX DM 50, consolidating fixative. MICRON
PAINT can be applied using a brush, a roll or a spray in two coats. We recommend to dilute 1st coat with 30% water while the 2nd
with 20%