+39 0931 882299 Chiamaci
info@ditancolor.it Scrivici
C.da Pantano 96010 Palazzolo Acreide (SR)

Murella

Murella

Breathable water-based paint for interiors and exteriors

MURELLA is a breathable water-based paint for interiors and exteriors characterized by an excellent degree of coverage. Excellent brushability and yield. Remarkable conservation of the treated walls.

Description

■ TECHNICAL CHARACTERISTICS
MURELLA is a breathable, water based paint with an excellent coating properties, yield and white base. It’ a protective paint, very
easy to apply.

■ COMPOSITION AND USE
MURELLA is made up of quality polymeric binders in watery emulsion, micronized charged particles, fungicide and specific
additives. It may be used on all surfaces like lime or cement based plaster, plasterboard and concrete. It is recommended for the
painting of facades of old and new buildings.

■ PREPARING SURFACES AND APPLICATION
New facades:
The walls will have to be seasoned and dry, free from powder and dirt. Any traces of oils, waxes, grease, etc must be opportunely
removed. Brush and remove any residual of working. Fix and isolate the imperfections of walls. Wait at least 28 days after applying
plaster. Very absorbent surfaces or with significant differences in absorption, crumbly plasters must be preventively treated with
ACRIL PRIMER, acrylic insulator, or with IDROFIX DM 50, consolidating fixative. Then apply two or more coats of MURELLA
by roller, brush or spray. The first coat goes diluted with 40% of water, the second one with 30%.
Old weathered surfaces:
Walls just painted with paintings firmly attached to the substrates must be properly clean, removing residual of powder, dirt, oils,
waxes, fats, etc. Subsequently consolidate walls with ACRIL PRIMER or with IDROFIX DM 50. Apply paintings only after
complete drying of treated surfaces. If walls are painted with paintings not firmly attached to supports is necessary to brush, scrap or
strip of the parts to remove. Finish the job with consolidation and painting.